This website uses cookies. By using the site you are agreeing to our Privacy Policy.
This website uses cookies. By using the site you are agreeing to our Privacy Policy.
Supported：・chrome 101・Firefox 100・Microsoft Edge 101
This simulator is a convenient tool for estimation only. It is not intended to provide exact measurements.The calculated figures may vary depending on usage and ambient conditions.The calculation result is from the lens center or front lens of projector. There may be a few % differences from the actual measurements.The size of projector is not accurate.
| Brightness | 6000lm |
|---|---|
| Resolution | 1920x1200 |
| Lens shift | V±70%、H±35% |
| Zoom | x1.0-x1.1 |
| Throw ratio | 0.34-0.37 |
| Depth: |
|
|---|---|
| Width： |
|
| Height： |
|
Unit of measure:
Can not project
Can not project
部屋の奥行きを超える距離を入力できません
*Gray area: You cannot project here because the body is between the lens and screen.
Mode：
You can save up to 3 settings.
| Room | Projecter | Lens | Screen | Mode | Date | Share | Delete | |
|---|---|---|---|---|---|---|---|---|
| 1 |  |
 |
||||||
| 2 | |
|
||||||
| 3 | |
|
・Please change settings in your current browser to print correctly.
・Please print with background image and colors not to miss all the information.
Here is explanation of basic specifications for the model.
Here you can change the room size and measurement unit (m/inch/ft)
Here you can change the measurement unit at a once.
Here you can choose installation style .
Here you can choose installation type.
Here you can set mount rotation angle.
Here you can set lens rotation angle.
Here you can set optical lens zoom ratio.
Here you can change aspect ratio from 16:9, 16:10, and 4:3.
Here you can set screen size.
*Please note that you can set the figures out of specification.
Here you can preview the shape of FP-Z5000 in accordance with settings.
Here you can preview projection in accordance with settings.
Here you can adjust the position of projector by dragging the projector icon or inputting the distance in the box below. The upper and right axis shows the distance to the front lens of projector, and the bottom and left axis shows the distance to the body of projector. *Please note that you can set the figures out of specification.
Here you can adjust the position of projector by dragging the projector icon . Also you can adjust position of screen within lens shift area by dragging the screen. The upper and right axis shows the distance to the center of lens of projector, and the bottom and left axis shows the distance to the corner of screen . *Please note that you can set the figures out of specification .
You can adjust position of projector, fixing horizontally or vertically
You can adjust position of projection, fixing the position of projector or screen.
