Enter a search term and click .

Overview

Installation and Storage Guidelines

Do not install or store the unit in the following locations:

  • Places subject to vibration or impact: For example, areas where vibration from power sources is transmitted or inside vehicles or ships. Such conditions may damage internal components and cause malfunction.
  • Near high-voltage power lines or power sources: These locations may be prone to electromagnetic interference.
  • Areas with strong magnetic fields: Strong magnetic fields may result in malfunction.
  • Outdoors or in areas with excessive moisture or dust: Locations with oil smoke, steam, or corrosive gases may cause the cabinet to deform or crack, corrode metal parts, or lead to malfunction.
  • Near the seaside: Exposure to corrosive salt air may result in damage or product failure, including the risk of the product falling.
  • Near the air outlet of an air conditioner: Direct exposure to hot or cold air may cause screen "flicker."
  • Near lighting equipment (such as studio lamps): Sudden temperature changes may shorten the lifespan of the light source or cause the unit to deform or malfunction.
  • In areas with high-output laser equipment: If laser light enters the projection lens, it may cause failure of the DLP chip.

dCAUTIONS

If used in a dusty environment, the internal airflow system responsible for cooling and exhaust may be obstructed, leading to reduced brightness or damage. Regular maintenance is required to prevent such issues.

dCAUTIONS

  • Please do not install this unit in an enclosed space.
  • In the event that it must be installed in an enclosed space, please ensure that appropriate air conditioning or ventilation equipment is provided.
  • Insufficient ventilation may cause heat to accumulate, potentially leading to the shutdown of the device.
  • When fixing this unit to the ceiling or wall, please ensure that the mounting screws and power cord do not come into contact with any metal parts inside the wall or ceiling.
  • Contact with metal parts may result in the risk of electric shock.
  • Please note that we cannot assume responsibility for any damage to the product caused by improper installation, even during the warranty period.
  • Lastly, we kindly request that you promptly remove and dispose of the product after it is no longer in use.

Spacing

When installing the projector, choose a location where the vents will be a safe distance from walls or other obstructions. When installing units one above another, for example on shelves, leave a distance of no less than approximately 10 cm (0.33 ft) between the shelves and the wall.

When installing two or more projectors side-by-side, Please maintain installation spacing suitable for the environmental temperature (the ambient temperature). You will also need to ensure that the warm air from the exhaust vent does not enter any of the projectors’ intake vents.

dCAUTIONS

  • Do not obstruct the vents. The build-up of heat inside the projector could cause fire.
  • After startup, the image will shift a few pixels until the temperature of the lens is stabilized by the laser source; please check after 30 minutes to 1 hour. Also, do not adjust (readjust) the blending until it stabilizes.
  • If the projector is installed in a location where heat builds up, the image may become unstable. Please ensure that the installation meets the above conditions.

Height Adjustment

The height of the projector can be adjusted (by about 1.9 cm) using the adjustable feet.

Ceiling Mount Installation Precautions

  • When suspending the projector from the ceiling, be sure to use the specified ceiling mount.
  • When installing the projector, attach the drop-prevention kit included with the ceiling mount. Refer to your dealer if you require a drop-prevention kit.
  • Ceiling installations should be performed only by qualified technicians.
  • See the ceiling mount installation instructions for details.

Ceiling Mount Screw Specifications