.SYSTEM SETUP: Basic
Adjust basic system settings.
Langouage
Choose the language in which menus and messages are displayed.
| Options | ||
|---|---|---|
| English | 日本語 | ไทย |
| Français | 한국어 | Norsk |
| Deutsch | Svenska | Bahasa Indonesia |
| Italiano | Nederlands | Tiếng Việt |
| Español | Türkçe | Čeština |
| Русский | Portuguese | Suomi |
| 繁體中文 | Polski | Ελληνικά |
| 简体中文 | Dansk | Magyar |
Menu Settings
Adjust menu display settings.
Press ENTER to display options and then select the desired item.
Menu Display Time
Choose how long the menus are displayed on the screen.
| Options | ||||
|---|---|---|---|---|
| 5 sec | 10 sec | 20 sec | 30 sec | Always |
bMEMO
The on-screen display for lens shift, focus 1/2, and zoom operations is always set to 30 seconds.
Menu Position
Choose where the menus are displayed on the screen.
| Options | ||||
|---|---|---|---|---|
| Center | Top Left | Top Right | Bottom Right | Bottom Left |
Reminder Message
Select On to display alerts.
| Options | |
|---|---|
| On | Off |
bMEMO
Selecting Off for Reminder Message disables the display of alarm alert messages.
Menu Transparency
Adjust the transaprency of the menu.
| Options |
|---|
| 0～90 |
Background Color
Choose the menu background color.
| Options | |||||
|---|---|---|---|---|---|
| FUJIFILM (Blue) | FUJIFILM (White) | FUJIFILM (Black) | Black | Blue | Custom |
bMEMO
When set to Custom, the factory default is black. To use a custom background, you need to upload a background image via the aWeb control function.
Remote receiver
Sets the enable/disable status of the remote control sensor.
Press ENTER to display options and then select the desired item.
| Options | Description |
|---|---|
| Front | On / Off |
| Top | On / Off |
| Rear | On / Off |
| HDBaseT | On / Off |
Projector ID Settings
Choose an ID for each projector.
Press ENTER to display options and then select the desired item.
Enable
| Options | Description |
|---|---|
| Off | Turn the projector ID off. "The projector can be controlled by from any remote, regardless of its ID." |
| On | Choose the projector ID. You will need to set the remote control to the same ID. Refer to the aChoosing Ids section. |
Projector ID
Choose the projector ID.
| Options |
|---|
| 00~99 |
Press the ENTER button to apply the settings.
Panel Key Lock
Lock the controls on the body of the projector.
| Options | |
|---|---|
| On | Off |
bTIPS
- "To release the control-panel lock, press the selector right for three seconds."
Backlight Preferences
Configure the back light behavior and timeout setting for the panel keys and LED indicator.
Press ENTER to display options and then select the desired item.
Panel Key
Choose how long the backlight remains on when you press the control panel keys.
| Options | |||||
|---|---|---|---|---|---|
| On | Off | 5 sec | 10 sec | 20 sec | 30 sec |
bMEMO
- Selecting Off for Panel Key disables the backlight function and selecting On lights on the control panel backlight indefinitely until the projector is turned off.
Indicator
Choose when to light on the LED indicator.
| Options | ||
|---|---|---|
| On | Off | Warning Errors Only |
Security Settings
Adjust security settings.
Press ENTER to display options and then select the desired item.
New Password
- Press ENTER and set a new password.
- Choose a password of nine characters containing any combination of the numbers 1 through 4.
- After confirming the password by entering it a second time, press ENTER to proceed. You must supply the password when turning the projector on with On selected for Power on Lock.
Change Password
- Press ENTER and change the password.
- Enter the current password.
- Choose a new password of nine characters containing any combination of the numbers 1 through 4.
- After confirming the password by entering it a second time, press ENTER to proceed.
bMEMO
- Failure to provide the correct password for three times will prevent the projector being used or initialized. Be careful not to lose the password. Consult with the store at the point of purchase if the password is lost.
Power On Lock
Selecting On requires users to enter the password chosen using New/Change Password whenever the projector is turned on.
| Options | |
|---|---|
| On | Off |
bMEMO
After choosing On, you will be prompted to enter the password. Enter the password to proceed.
Audio Settings
Adjust audio settings.
Press ENTER to display options and then select the desired item.
Mute
Select On to mute audio.
| Options | |
|---|---|
| On | Off |
Volume
Adjust volume.
| Options |
|---|
| 0~50~100 |
4K Setting
Choose On to enable 4K setting or Off to disable.
| Options | |
|---|---|
| On | Off |
High Altitude Mode
When using the product at high altitudes (above 1,500 m/4,900 ft), select On for High Altitude Mode to ensure that the product's internal temperature-control mechanism functions correctly. Failure to observe this precaution could shorten the life of the product's parts.
| Options | |
|---|---|
| On | Off |
Reset Settings
Restore all items in a selected menu to their default values.
Press ENTER and choose the menu to be reset.
| Options | Description |
|---|---|
| Display Settings | Reset the items in the DISPLAY menu to default values. |
| Picture Settings | Reset the items in the PICTURE menu to default values. |
| BASIC Settings | Reset the items in the SYSTEM SETUP : Basic menu to default values. |
| ADVANCED Settings | Reset the items in the SYSTEM SETUP : Advanced menu to default values. |
| Initialize | Reset the items in all menus (DISPLAY, PICTURE, SYSTEM SETUP : Basic, and SYSTEM SETUP : Advanced) to their default values. The following items are not reset:
|
bMEMO
Highlighting a menu and pressing ENTER displays a confirmation dialog; select Reset to restore the items in the selected menu to their default values.