Enter a search term and click .

SYSTEM SETUP : Advanced

Lens Shift Settings

Adjust lens shift options.

Press ENTER to display options and then select the desired item.

Shift Area

Choose how much the lens can be shifted.

  • Limited: Lens shift is restricted, preventing any portion of the image being eclipsed.

    A Lens centered

    B Image shifted down and to the left: entire image visible

  • Full: The lens can be shifted throughout its range.

    A Lens centered

    B Image shifted down and to the left: bottom left corner of image not visible

Auto Lens Shift

If On is selected, the lens will automatically be restored to the last-used lens shift position after being rotated.

Audio Settings

Adjust audio settings.

Press ENTER to display options and then select the desired item.

Mute

Select On to mute audio.

Volume

Adjust volume.

Light Source Settings

Adjust light source settings.

Press ENTER to display options and then select the desired item.

Light Source Mode

Choose a light-source brightness mode.

Options
Normal (100%) Economic (70%) Dimmer (25%)

Dynamic Black

The projector automatically detects when the entire image is black and turns the laser off. The laser turns on automatically when the image changes.

Light Source Information

View information about the light source.

Option Description
Light Source Usage Time The length of time the light source has been on.
Normal The length of time the light source has been on with Normal selected for Light Source Mode.
Economic The length of time the light source has been on with Economic selected for Light Source Mode.
Dimmer The length of time the light source has been on with Dimmer selected for Light Source Mode.
Equivalent Light Source Hour The length of time the laser has been on.

Security Settings

Adjust security settings.

Press ENTER to display options and then select the desired item.

Change password

Press ENTER and change the password.

Change Security Settings

Press ENTER and adjust security settings.

Power on Lock

If On is selected, users will be prompted to enter a password when the projector is turned on.

This option applies only if a password has been specified.

Standby Settings

Adjust network standby settings.

Press ENTER to display options and then select the desired item.

Network

Press ENTER to display network standby options and then select the desired item.

  • Enable Network Standby Mode: Select On to enable network standby mode when the projector is on standby. The indicator lamp will flash amber.

  • Switch to Normal Standby Mode: Choose the network standby time.

    Options
    Off 20 min 1 hr 3 hr 6 hr

Network Settings

Adjust network settings.

Press ENTER to display options, then adjust them as desired.

Option Description
Status View network status.
DHCP Select On when using the Dynamic Host Configuration Protocol (DHCP).
IP Address Enter an IP address.
Subnet Mask Enter a sub-net mask.
Default Gateway Enter the default gateway address.
DNS Server Enter a DNS server address.
Apply Press ENTER to apply the above settings.

High Altitude Mode

When using the product at high altitudes (above 1,500 m/4,900 ft), select Enable for High Altitude Mode to ensure that the product's internal temperature-control mechanism functions correctly. Failure to observe this precaution could shorten the life of the product's parts.

Reset All Settings

Reset all projector settings to their default values.

To reset settings, press ENTER to display a confirmation dialog, highlight Reset, and press ENTER again.

dCAUTION

Reset All Settings does not reset lens shift.