.Warping (Geometric Correction) and Edge Blending
Using geometric distortion correction allows you to project onto surfaces such as a curved screen or project a single image using multiple projectors.
Types and Limitations of warping and edge blending
This unit is equipped with two types of warping and edge blending function: one configured via the remote control from the operation menu, and another configured using a dedicated application installed on a PC.
Differences between the geometric distortion correction function are as follows.
| No. | Application Version | Operation menu version |
|---|---|---|
| Operation Method | Operate via a dedicated application installed on a PC (LAN environment required) | Operation via remote control |
| Maximum warping grid number | 65* × 33 (*If 65, the frame rate is up to 60Hz) |
17 × 17 |
| Grid point movement | Single point, multiple points, or per line | Single point |
| Black Level Correction | On | None |
| Mask Function | On | None |
| Simultaneous Multi-Projection Control | Supported | - |
| Data Storage Location | PC and projector internal memory | Projector Internal Memory |
When geometric distortion correction is enabled, the following functions cannot be used.
- KEYSTONE
- Corner Fit
- Pincushion
Applications can be downloaded from the link below. For details, please refer to the included manual.