.Geometric Correction Range
bTIP
Figures are approximations and may vary from the actual values by a few percent.
| Keystone correction *1 | ||
|---|---|---|
| (1) Horizontal | (2) Vertical | |
| Lens shift position | Correction angle “A” | Correction angle “B” |
|
±0％ vertical (V), ±0％ horizontal (H)
|
±5° | ±5° |
|
+50％ vertical (V), ±0％ horizontal (H)
|
ー | ー |
Amount applied using Keystone in the projector menus.
| (1) Horizontal keystone correction (top view) |
|---|
|
A Screen
|
| (2) Vertical keystone correction (side view) |
|---|
|
A Screen
|
| Screen curvature correction *2 (minimum R/L value) |
||||
|---|---|---|---|---|
| Concave | Convex | |||
| Lens shift position | (3) Horizontal | (4) Vertical | (5) Horizontal | (6) Vertical |
|
±0％ vertical (V), ±0％ horizontal (H)
|
1.10 | 0.83 | 4.83 | 2.09 |
|
±50％ vertical (V), ±0％ horizontal (H)
|
2.69 | 1.66 | 4.83 | 3.66 |
Amount applied using the “Warping and Blending Tool” computer software’s warping feature (FP-Z8000 only). Adjustments to focus may fail to produce the desired results at higher values.
| (3) Concave horizontal curvature correction (top view) |
|---|
|
A Screen B Arc center L: Throw distance R: Arc radius
|
| (4) Concave vertical curvature correction (side view) |
|---|
|
A Screen B Arc center L: Throw distance R: Arc radius
|
| (5) Convex horizontal curvature correction (top view) |
|---|
|
A Screen B Arc center L: Throw distance R: Arc radius
|
| (6) Convex vertical curvature correction (side view) |
|---|
|
A Screen B Arc center L: Throw distance R: Arc radius
|
