Enter a search term and click .

SYSTEM SETUP : Advanced

Light Source Mode

Choose a light-source brightness mode.

Options
Normal Eco(60%)

Light Output Setting

Adjust the brightness of the light source. Choose from values of from 20 to 100 in increments of 10. This option is available only when Bright is selected for Picture Mode in the PICTURE menu. When Eco(60%) is selected for Light Source Mode in the SYSTEM SETUP : Advanced menu, brightness is fixed at 60%.

Light Source Information

View information about the light source.

Press ENTER to view information about the light source.

Option Description
Light Source Usage Total Time The total length of time the light source has been on in Normal and Eco(60%) modes.
Normal The length of time the light source has been on with Normal selected for Light Source Mode.
Eco(60%) The length of time the light source has been on with Eco(60%) selected for Light Source Mode.

Shutter Setting

Adjust projector shutter settings.

Pressing ENTER displays a sub-menu containing the items listed below.

Fade-in

Choose how long the picture takes to fade in after the shutter button is pressed to resume projection.

Options
Off 0.6s 1.0s 2.0s 3.0s 4.0s 5.0s 7.0s 10.0s

dCAUTION

Fade-in is enabled only after projection has been suspended (i.e., the projector has been in the SHUTTER state, with image and sound output suspended) for at least three minutes. The picture will not fade in if projection is resumed earlier.

Fade-out

Choose how long the picture takes to fade out when the shutter button is pressed to suspend projection.

Options
Off 0.6s 1.0s 2.0s 3.0s 4.0s 5.0s 7.0s 10.0s

Dynamic Black

Choose whether the projector detects when a solid black image is displayed and automatically reduces output by 70%. The projector automatically restores output to 100% when an image that is not solid black is displayed.

Options
On Off

bTIP

Selecting On overrides the option selected for Light Source Mode.

Dynamic Contrast Ratio

If On is selected, the projector will detect when a solid black image is displayed and automatically suspend output. Dynamic black will be given priority if On is selected for Dynamic Black.

Options
On Off

Operation Settings

Set timers and the like.

Press ENTER to display options and then select the desired item.

Direct Power On

If On is selected, the projector will turn on automatically (i.e., without your pressing the power button) if the main power switch is on when power is supplied.

Options
On Off

Auto Power Off

Choose the length of time before the projector automatically enters standby.

Options
Disable 3 min 10 min 15 min 20 min 25 min 30 min

Fade-Out timer

Choose how long it takes in the absence of an input signal for output to resume after the shutter button is pressed to suspend projection.

Options
Disable 5 min 10 min 15 min 20 min 25 min 30 min

Sleep Timer

Choose the length of time before the projector enters standby.

Options
Disable 30 min 1 hr 2 hr 3 hr 4 hr 8 hr 12 hr

Date and Time Setting

Set the projector clock.

Press ENTER and select Date or Time to view settings for the selected item.

Option Description
Date Enter a value for the date in mmyydd format.
Time Enter a value for the time in hh:mm format.

Schedule Setting

Turn the projector on or off automatically according to the day of the week.

Press ENTER and select a day of the week to display options for the selected day.

Options
Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday

Choose whether the projector is used on the selected day and if so the input used and the times at which the projector turns on or switches to standby.

Press ENTER and select a day of the week to display options for the selected day.

dCAUTIONS

  • Date and Time Setting will be reset automatically if the projector is without power for three consecutive hours. Leave the projector on standby when using Schedule Setting.
  • Schedule Setting can only be used if the projector clock has been set using Date and Time Setting.

bTIP

Enabling Daily configures the projector to operate on the same schedule every day, regardless of the day of the week.

Control Channel

Choose the type of input used for projector control.

Options
LAN・RS-232C HDBaseT

Standby Settings

Adjust network standby settings.

Press ENTER to display options and then select the desired item.

Enable Network Standby Mode

Selecting On enables network standby when the projector is in standby mode. The indicator lamps will flash red.

Options
On Off

Switch to Normal Standby Mode

Choose how long Enable Network Standby Mode remains on.

Options
Off 20 min 1 hr 3 hr 6 hr

LAN Settings

Adjust network settings.

Press ENTER to display network options and then adjust them as desired. Highlight Apply and press ENTER to apply changes when settings are complete.

Wired LAN

Option Description
Status View network status (display only).
AMX Device Discovery If On is selected, the projector will automatically be detected by AMX controllers connected to the current network.
DHCP Select On when using the Dynamic Host Configuration Protocol (DHCP). The settings below can be adjusted when Off is selected.
Projector IP Address Enter an IP address.
Subnet Mask Enter a sub-net mask.
Default Gateway Enter the default gateway address.
DNS Server Enter a DNS server address.
Apply Press ENTER to apply changes to settings.

MAC Address

View the projector’s MAC address (display only).