Connections
Connect the FP-Z8000 (A) to the source (HDMI output) device (B) and the computer to which you installed the Warping and Blending Tool (C).
bTIPS
- Adjust focus and choose an aspect ratio on the FP-Z8000 prior to connection.
- Restore the default keystone and corner fit settings.
- Do not turn the FP-Z8000 or computer off while adjusting settings with the Warping and Blending Tool. If you do turn either device off, you will need to re-establish the connection between the FP-Z8000 and the Warping and Blending Tool.