Enter a search term and click .

Menu List

The projector menus are organized as shown below.


DISPLAY

Item Options (defaults in bold)
Lens Setting Lens shift: —
Lens shift settings: Shift area (Limited / Full) / Auto lens shift (On / Off) / Home Position
FOCUS 1: —
FOCUS 2: —
Zoom: —
Test Pattern Off / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 11 / 12 / 13
Projector Position Front Table / Rear Table / Rear Ceiling / Front Ceiling
Aspect Ratio Auto / Real / 4:3 / 16:10 / 16:9
Keystone Axis - Vertical (V): -60 – 0 – 60
Axis - Horizontal (H): -60 – 0 – 60
Corner Fit V (Vertical): 0 – 60
H (Horizontal): 0 – 60
Blanking Upper (0 – 300), Lower (0 – 300), Left (0 – 500), Right (0 – 500)
Digital Zoom 1.0 – 2.0
Raster Position With a 16 : 9 input signal: Upper (0 – 60), Lower (0 – 60)
Lens Rotation setting

PICTURE

Item Options (defaults in bold)
Picture Mode Bright / Standard / sRGB / DICOM SIM
Brightness 0 – 50 – 100
Contrast -50 – 0 – 50
Tint -45 – 0 – 45
Color -50 – 0 – 50
Gamma 1.6 – 2.2 – 3.3
Sharpness 0 – 15 – 31
Color Temperature 3200K – 7100K – 9300K
Color Temperature Fine Tuning R / G / B Gain: 0 – 100 – 200
R / G / B Offset: -50 – 0 – 50
7colors Tuning

R, G, B, C, M, or Y Selected for Color

  • Hue: -99 – 0 – 99
  • Gain: 0 – 50 – 100
  • Saturation: -50 – 0 – 50

W Selected for Color

  • R Gain: 0 – 50 – 100
  • G Gain: 0 – 50 – 100
  • B Gain: 0 – 50 – 100

SOURCE

Item Options (defaults in bold)
Quick Auto Search On / Off
INPUT HDMI1 / HDMI2 / DisplayPort / HDBaseT / SDI
HDMI Range Auto / Full / Limited
Color Space Conversion Auto / RGB / YUV
HDMI Equalizer Auto / lower / low / middle / high / higher

SYSTEM SETUP : Basic

Item Options (defaults in bold)
Language 18 languages
Menu Settings Menu display time: Always / 30 sec / 20 sec / 10 sec / 5 sec
Menu position: Center / Bottom-Left / Bottom-Right / Top-Left / Top-Right
Reminder Message: On / Off
Background Color FUJIFILM(Blue) / FUJIFILM(White) / FUJIFILM(Black) / Black / Blue
Remote Receiver All / Front+Side / Rear+Side / Side
Panel Key Lock On / Off
Projector ID Setting 01 – 99 / Off
Security Settings Power on Lock: On / Off
Audio Settings Mute: On / Off
Volume: 0 – 5 – 10
source (FP-Z8000 only): On / Off
High Altitude Mode On / Off
Reset Settings

SYSTEM SETUP : Advanced

Item Options (defaults in bold)
Light Source Mode Normal / Eco(60%)
Light Output Setting 20 – 100
Light Source Information
Shutter Setting Fade-in: Off / 0.6s / 1.0s / 2.0s / 3.0s / 4.0s / 5.0s / 7.0s / 10.0s
Fade-out: Off / 0.6s / 1.0s / 2.0s / 3.0s / 4.0s / 5.0s / 7.0s / 10.0s
Dynamic Black: On / Off
Dynamic Contrast Ratio: On / Off
Operation Settings Direct Power On: On / Off
Auto Power Off: Disable / 3 min / 10 min / 15 min / 20 min / 25 min / 30 min
Fade-Out timer: Disable / 5 min / 10 min / 15 min / 20 min / 25 min / 30 min
Sleep Timer : Disable / 30 min / 1 hr / 2 hr / 3 hr / 4 hr / 8 hr / 12 hr
Date and Time Setting Date / Time
Schedule Setting On / Off
Control Channel LAN・RS-232C / HDBaseT
Standby Settings Enable Network Standby Mode: On / Off
Switch to Normal Standby Mode: Off / 20 min / 1 hr / 3 hr / 6 hr
LAN Settings AMX Device Discovery: On / Off
DHCP: On / Off