PJLink Commands
The network feature supports Class 1 and 2 PJLink commands.
Projector settings can be adjusted and projector status queried from the computer using PJLink protocol.
PJLink Class 1 Commands
The projector supports the following PJLink commands. User-supplied information is represented by asterisks (“*”).
Command | Control details | Parameter/response string | Z8000 | Z6000 |
---|---|---|---|---|
%1POWR | Power supply control | 1 | Power on | |
0 | Standby | |||
%1POWR ? | Power supply status query | 1 | Power on | |
0 | Standby | |||
%1INPT | Input selection | 31 | HDMI1 | HDMI1 |
32 | HDMI2 | DisplayPort | ||
33 | DisplayPort | HDBaseT | ||
34 | HDBaseT | SDI | ||
35 | SDI | ― | ||
%1INPT ? | Input selection query | 31 | HDMI1 | HDMI1 |
32 | HDMI2 | DisplayPort | ||
33 | DisplayPort | HDBaseT | ||
34 | HDBaseT | SDI | ||
35 | SDI | ― | ||
%1AVMT | AV mute | 11 | Video mute ON * | |
10 | Video mute OFF | |||
21 | Audio mute ON | |||
20 | Audio mute OFF | |||
31 | Video * and audio mute ON | |||
30 | Video and audio mute OFF | |||
%1AVMT ? | AV mute status query | 11 | Video mute ON | |
21 | Audio mute ON | |||
31 | Video and audio mute ON | |||
30 | Video and audio mute OFF | |||
%1ERST ? | Error status query | 000000 | Normal status | |
100000 | Fan warning | |||
200000 | Fan error | |||
010000 | Lamp warning | |||
020000 | Lamp error | |||
001000 | Temperature warning | |||
002000 | Temperature error | |||
000001 | Other warning | |||
000002 | Other error | |||
%1LAMP ? | Light source status query | *** | Light source runtime: *** hours | |
%1INST ? | Input selection list query | 31 | HDMI1 | HDMI1 |
32 | HDMI2 | DisplayPort | ||
33 | DisplayPort | HDBaseT | ||
34 | HDBaseT | SDI | ||
35 | SDI | ― | ||
%1NAME ? | Projector name query | FP-Z8000 | Projector name | |
%1INF1 ? | Manufacturer name query | FUJIFILM | Manufacturer name | |
%1INF2 ? | Model name query | FP-Z8000 | Model name | |
%1INF0 ? | Other information query | WUXGA Projector | Other information | |
%1CLSS ? | Class information query | CLASS2 | Class for PJLink |
* This functions as a shutter function.
PJLink Class 2 Commands
Command | Control details | Parameter/response string | Z8000 | Z6000 | |
---|---|---|---|---|---|
%2SRCH | Projector search | **:**:**:**:**:** | MAC address | ||
%2LKUP= | Link up notification | **:**:**:**:**:** | MAC address | ||
%2ERST= | Error notification | 000000 | Normal status | ||
100000 | Fan warning | ||||
200000 | Fan error | ||||
010000 | Lamp warning | ||||
020000 | Lamp error | ||||
001000 | Temperature warning | ||||
002000 | Temperature error | ||||
000001 | Other warning | ||||
000002 | Other error | ||||
%2POWR= | Power supply status notification | 0 | Standby | ||
1 | Power on | ||||
%2INPT= | Input selection notification | 31 | HDMI1 | HDMI1 | |
32 | HDMI2 | DisplayPort | |||
33 | DisplayPort | HDBaseT | |||
34 | HDBaseT | SDI | |||
35 | SDI | ― | |||
%2INPT | Input selection | 31 | HDMI1 | HDMI1 | |
32 | HDMI2 | DisplayPort | |||
33 | DisplayPort | HDBaseT | |||
34 | HDBaseT | SDI | |||
35 | SDI | ― | |||
%2INPT ? | Input selection query | 31 | HDMI1 | HDMI1 | |
32 | HDMI2 | DisplayPort | |||
33 | DisplayPort | HDBaseT | |||
34 | HDBaseT | SDI | |||
35 | SDI | ― | |||
%2INST ? | Input selection list query | 31 | HDMI1 | HDMI1 | |
32 | HDMI2 | DisplayPort | |||
33 | DisplayPort | HDBaseT | |||
34 | HDBaseT | SDI | |||
35 | SDI | ― | |||
%2SNUM? | Serial number query | ******** | Serial number | ||
%2SVER ? | Software version query | *.**/*.** | Projector software ver / LAN software ver | ||
%2INNM ? | Input terminal name query | 31 | HDMI1 | HDMI1 | |
32 | HDMI2 | DisplayPort | |||
33 | DisplayPort | HDBaseT | |||
34 | HDBaseT | SDI | |||
35 | SDI | ― | |||
%2IRES ? | Input signal resolution query | 1st | **** | Horizontal resolution | |
2nd | **** | Vertical resolution | |||
%2RRES ? | Recommended resolution query | 1st | 1920 | Horizontal resolution | |
2nd | 1200 | Vertical resolution | |||
%2SVOL | Speaker volume control | 0 | One level down | ||
1 | One level up | ||||
%2FREZ | Freeze control | 1 | Freeze | ||
0 | Freeze clear | ||||
%2FREZ ? | Freeze status query | 1 | Freeze | ||
0 | Freeze clear |
bTIPS
- If you turn the projector off after changing the IP address, the new settings will be reflected in the display 30 seconds after you next turn the projector on.
- It takes about 60 seconds to accept commands after turning on the power.