Enter a search term and click .

Saving and Loading Project Info

Saving Project Info

Save projector settings. Generic, Warping, Blending, Color, and Painting settings adjusted or edited using the Warping and Blending Tool are saved to a “*.csv” file on the computer. The changes made using the Warping and Blending Tool will remain in effect on the projectors.

dCAUTION

Settings adjusted or edited using the Warping and Blending Tool must be saved separately for each projector (device). Saving settings to your computer allows them to be stored even when the projectors are turned off. Adjustments to settings and the resolution selected for the HDMI 2 input signal are saved and remain in effect until changed in the Warping and Blending Tool.

  1. At the bottom of the dialog, choose the projector for which you want to save settings.

  2. Select Save or Save as in the File menu.

    When naming the files, keep in mind that a separate csv file is required for each projector.

    The USB cable for the control connection can be disconnected once settings have been saved.

Loading Project Info

Edit saved projects.

After connecting all the projectors, select Open Project in the File menu and load the projectors’ csv files.

  1. After connecting the projectors to the computer and image signal input, launch the Warping and Blending Tool, select New Project in the File menu, and follow the steps for setting up a new project until you get to the Generic tab.

  2. Select the projector for which you want to load settings.

  3. Select Open Project in the File menu and choose a file.